본문 바로가기

Indicating and Switch

P510 Series_Euro gauge Electrical contact type pressure gauge (Modular system)

P510 Series

Service intended

P510 series are designed for a local reading of measured pressure and equipped with the inductive contact block which allows all the combinations of contacts to be used. The contact block is mounted on the dial. The window is fitted with a knob for external adjustment of the setpoints.

Nominal diameter 100 and 160 mm
Accuracy ±1.0 % of full scale
Scale range (MPa, kPa, bar) -0.1 ~ 0 to 0 ~ 200 MPa
Working pressure Steady : 100 % of full scale
Over range protection : 130 % of full scale
Working temperature Ambient : -40 ~ 65 °C
Fluid : Max. 100 °C
Degree of protection EN60529/IEC529/IP67
Temperature effect Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately
±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection Stainless steel (316SS)
Element Stainless steel (316SS)
<10 MPa : C type bourdon tube
≥10 MPa : Helical type bourdon tube
Case Stainless steel (304SS)
Bezel ring Stainless steel (304SS) Bayonet type
Window Polycarbonate
Movement Stainless steel
Dial White aluminium with black graduations
Pointer Black painted aluminium alloy
Conduit connection M20 x 1.5
Process connection ⅜", ½" PT, NPT and PF
Certificates Pressure equipment directive (2014/68/EU) Annex III Module H
Option Damping movement

© WISE Control Inc. All rights reserved. ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Download

CATALOG

MANUAL

HOW TO ORDER

Certificates

Attached files

공유하기


맨 위로 이동