: Indicating and Switch

Service intended

The P650 series are designed to measure a differential pressure from 25 kPa to 2.0 MPa at static pressure up to 10 MPa, and have electrical contact. A set of two stainless steel bellows mounted on a force balance allows direct reading of the actual differential pressure. These models are designed to control and alarm for a differential pressure.

Nominal diameter	160 mm
Accuracy	±1.0 % of full scale ±1.6 % of full scale
Scale range (MPa, kPa, bar, mbar)	0 ~ 25 kPa to 0 ~ 0.25 MPa (P651 model) 0 ~ 0.4 MPa to 0 ~ 2.0 MPa (P652 model)
Static pressure	Max. 10 MPa
Working temperature	Ambient : -20 ~ 65 °C Fluid : Max. 100 °C
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS), Monel and Hastelloy-C
Element	Bellows Stainless steel (316L SS), Monel and Hastelloy-C
Case	Stainless steel (304SS)
Bezel ring	Stainless steel (304SS) Bayonet type
Window	Polycarbonate
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Conduit connection	M20 x 1.5
Process connection	¼" NPT(F) ½" NPT(F) at 3-way and 5-way manifold valve
Standard accessories	Mounting bracket for 2" pipe mounting with silver gray finished steel
Certificates	Pressure equipment directive (2014/68/EU) Annex III Module H
Option	■ Remote seal ■ Mounting bracket with 316SS for 2" pipe mounting ■ 3-way manifold valve (316SS, Monel) ■ 5-way manifold valve (316SS, Monel)

Download

Certificates

타이틀

P650 series_Differential pressure gauge with electrical contact type

P650 series (P651, P652)

Attached files

Indicating and Switch

타이틀

Attached files

공유하기